Which Furnace Brands Are Actually Made in Canada?

The Short Answer

Only a handful of gas furnace brands are still built in Canada:

• Napoleon, made by Wolf Steel Ltd. in Barrie, Ontario
• Continental, Napoleon’s sister brand, also made by Wolf Steel in Barrie, Ontario
• Dettson, made in Sherbrooke, Quebec

Most of the other brands you’ll see on a BC quote, including Lennox, Carrier, Goodman, Trane and Rheem, build their residential furnaces in the United States or Mexico, even when they have Canadian head offices or distribution.

“Made in Canada” is a reasonable tiebreaker. It isn’t a quality guarantee on its own: every furnace sold here must meet the same federal 95% AFUE minimum and Canadian safety certification. Installation still matters more than the badge.

Canadian-Built Furnace Brands Compared

Brand	Made in	Parent company	Lineup highlights	Best fit
Napoleon	Barrie, ON	Wolf Steel Ltd. (family-owned)	9500 single-stage, 9600 two-stage, 9700 two-stage up to 97.1% AFUE	Most family homes; strong registered warranty
Continental	Barrie, ON	Wolf Steel Ltd.	High-efficiency gas furnaces sharing Napoleon’s manufacturing base	Buyers whose contractor carries Continental
Dettson	Sherbrooke, QC	Dettson (Canadian)	Compact, low-capacity furnaces and air handlers, including the Chinook modulating gas furnace	Small or well-insulated homes, townhomes, new builds

Napoleon

Napoleon is the best-known Canadian HVAC brand. It’s owned by Wolf Steel Ltd., a family-owned company founded in Barrie in 1976 and better known for fireplaces and grills. Its current gas furnace lineup is the 9500 (95% AFUE, single-stage), 9600 (up to 96%, two-stage, variable-speed, ENERGY STAR) and 9700 (up to 97.1%, two-stage, variable-speed, upflow only).

When registered online within 60 days, Napoleon’s warranty covers the heat exchanger for life and parts for 10 years, with a replacement furnace if the heat exchanger fails early. Our full Napoleon furnace review covers each model and the warranty fine print.

Continental

Continental surprises a lot of homeowners: it’s made by the same company as Napoleon, at the same Barrie address. Wolf Steel sells Continental through its own dealer network, so one contractor may quote you a Napoleon and another a Continental, and both come from the same Canadian manufacturer.

If you’re comparing a Continental quote against a Napoleon quote, compare the specific model’s AFUE, burner type (single-stage vs two-stage), blower type and registered warranty terms rather than the brand name. Ask the installer which Napoleon model it most closely matches.

Dettson

Dettson builds in Sherbrooke, Quebec, and takes a different approach from most brands. It focuses on small-capacity furnaces and air handlers for homes that don’t need much heat. That’s increasingly common as new homes and deep renovations get tighter and better insulated. Its Chinook line comes in single-stage, two-stage and modulating versions. The smallest modulating Chinook Compact is rated at just 15,000 BTU/h and turns down to about 6,000 BTU/h at low fire, in a cabinet about 10 inches wide. A typical furnace starts around 40,000 BTU/h. That suits:

• New energy-efficient homes built to recent BC Energy Step Code levels
• Townhomes and smaller homes where a standard 60,000+ BTU furnace would be badly oversized
• Homes pairing a small furnace with a heat pump

Dettson has a smaller dealer network in BC than the big brands, so confirm your installer stocks parts and has serviced Dettson equipment before.

Where the Big Brands Are Actually Built

Brand	Where residential furnaces are typically built	Notes
Lennox	USA and Mexico	Founded 1895 in Marshalltown, Iowa; Canadian division since 1952
Carrier / Bryant	USA and Mexico	Part of Carrier Global
Goodman / Amana	USA (near Houston, Texas)	Owned by Daikin since 2012
Trane / American Standard	USA	Part of Trane Technologies
Rheem / Ruud	USA and Mexico	Also major water heater brands

“Where are Lennox furnaces made?” is one of the most-searched furnace questions in Canada. Lennox started in Marshalltown, Iowa, in 1895 and went international with Lennox Industries (Canada) Ltd. in 1952, so it has deep Canadian roots and a long-standing Canadian operation. But a Lennox furnace installed in a BC home today is almost always built at one of its US or Mexico plants. The exact origin of any furnace is printed on its data plate, the rating label inside the burner or blower door.

Does “Made in Canada” Actually Matter?

Where it helps:

• Designed for Canadian codes and conditions. Canadian manufacturers build to Canadian certification and efficiency rules from the start.
• Canadian parts distribution. Warranty claims and common parts can move through Canadian channels, which helps when cross-border shipping is slow or tariffs change.
• Supporting Canadian manufacturing, if that matters to you.

Where it doesn’t:

• Efficiency. Every new residential gas furnace sold in Canada must be 95% AFUE or better, whatever its origin.
• Safety. All furnaces sold here carry Canadian (CSA) safety certification.
• Installation. Correct sizing, venting, condensate drainage and gas commissioning determine how well any furnace runs and how long it lasts. A well-installed US-built furnace will outperform a poorly installed Canadian one.

Canadian-Made Furnace Prices in BC (2026)

Furnace	Typical installed cost (Lower Mainland, before GST)
Napoleon or Continental single-stage	$4,000 - $5,500
Napoleon or Continental two-stage	$5,000 - $6,500
Napoleon 9700 (top two-stage)	$5,500 - $7,500
Dettson compact furnace or Chinook modulating	$5,500 - $8,000

Canadian brands generally sit at or below comparable Lennox and Carrier models and slightly above Goodman. See our furnace replacement cost guide for the add-ons (venting, gas line, ductwork) that move a quote, and our Goodman furnace review for the main value alternative.

Buying a Canadian-Made Furnace in Coquitlam, Port Moody and the Tri-Cities

Napoleon and Continental are easy to source anywhere in the Lower Mainland. Both are stocked by BC distributors, and replacement parts are usually available within days. A few local factors are worth knowing in the Tri-Cities:

Hillside homes in Coquitlam and Port Moody. Many homes on Westwood Plateau, Burke Mountain and the slopes above Port Moody have mechanical rooms on a lower level and long vent runs to an exterior wall. Napoleon’s 9600 is multi-position and handles most of these layouts. The upflow-only 9700 needs an upflow installation, so check before you choose it. A replacement in Coquitlam typically lands in the middle of the price ranges above once venting is sorted.

Newer townhomes and Step Code builds. Townhome complexes around Burke Mountain, and newer infill in Port Moody, are often tight, well-insulated and have low heat loss. That’s where a compact Dettson furnace, or a heat pump with a small backup, can be a better fit than a standard 60,000-80,000 BTU furnace. Strata rules may also restrict where new vent terminations can go.

Older Port Coquitlam and Maillardville homes. Pre-1980 houses often have chimney-vented furnaces and orphaned gas water heaters. Whatever brand you choose, budget for venting conversion work.

Bottom Line

If you want a furnace built in Canada, your main choices are Napoleon and Continental from Barrie, Ontario, both made by Wolf Steel, or Dettson from Sherbrooke, Quebec, for smaller and well-insulated homes. They’re competitively priced and well-built. Lennox, despite its long Canadian history, builds its residential furnaces in the US and Mexico, as do most other major brands.

Choose the furnace that fits your home’s heat loss, layout and budget, then make sure it’s installed and registered properly.

Want a quote on a Napoleon or another Canadian-built furnace? Call 604-991-4894 or send us a message. We install and service furnaces across the Lower Mainland and Fraser Valley.